Overcome Exam Challenges with Pass4cram CWNA-109 Exam Questions

Wiki Article

BTW, DOWNLOAD part of Pass4cram CWNA-109 dumps from Cloud Storage: https://drive.google.com/open?id=19VTPC1umGYIfcKygMwKvJmGB5CHLqhlp

You may be upset about the too many questions in your CWNA-109 test preview. Now, you will clear your worries. Our CWNA-109 test engine can allow unlimited practice your exam. With the options to highlight the missed questions, you can know your mistakes in your CWNA-109 test training, then, you can practice with purpose. If you want to have 100% confidence, you can practice until you get right. Besides, you can do marks where possible, so as to review and remember next time.Through effort and practice, you can get high scores in your CWNP CWNA-109 real test.

Now is the ideal time to prepare for and crack the CWNA-109 exam. To do this, you just need to enroll in the CWNA-109 examination and start preparation with top-notch and updated CWNP CWNA-109 actual exam dumps. All three formats of CWNP Wireless Network Administrator (CWNA) CWNA-109 Practice Test are available with up to three months of free CWNP Wireless Network Administrator (CWNA) exam questions updates, free demos, and a satisfaction guarantee. Just pay an affordable price and get CWNA-109 updated exam dumps.

>> CWNA-109 Reliable Test Materials <<

CWNA-109 Latest Exam Answers - CWNA-109 Valid Test Topics

As the rapid development of the world economy and intense competition in the international, the leading status of knowledge-based economy is established progressively. A lot of people are in pursuit of a good job, a CWNA-109 certification, and a higher standard of life. You just need little time to download and install it after you purchase, then you just need spend about 20~30 hours to learn it. We are glad that you are going to spare your precious time to have a look to our CWNA-109 Exam Guide.

CWNP CWNA-109 Exam Syllabus Topics:

TopicDetails
Topic 1
  • WLAN Regulations and Standards: The topic discusses the roles of WLAN and networking industry organizations. It also addresses the concepts of various Physical Layer (PHY) solutions, spread spectrum technologies, and 802.11 WLAN functional concepts.
Topic 2
  • WLAN Protocols and Devices: It focuses on terminology related to the 802.11 MAC and PHY, the purpose of the three main 802.11 frame types, MAC frame format, and 802.11 channel access methods.
Topic 3
  • WLAN Network Security: It addresses the concepts of weak security options, security mechanisms for enterprise WLANs, and security options and tools used in wireless networks.

CWNP Wireless Network Administrator (CWNA) Sample Questions (Q79-Q84):

NEW QUESTION # 79
Your manager asked you to locate a solution that allows for centralized monitoring of WLAN performance over time. He wants a single pane of glass for administration and monitoring of the solution. What do you recommend?

Answer: B

Explanation:
The solution that you recommend is an Overlay WLAN monitoring solution. An Overlay WLAN monitoring solution is a system that uses dedicated sensors or probes to monitor the WLAN performance over time. The sensors are deployed throughout the WLAN coverage area and collect data on various metrics such as signal strength, noise level, channel utilization, interference, throughput, latency, packet loss, and QoS. The sensors send the data to a centralized server or appliance that analyzes the data and provides a single pane of glass for administration and monitoring of the solution. An Overlay WLAN monitoring solution can help to detect and troubleshoot WLAN issues, optimize WLAN performance, and generate reports and alerts. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-
109], page 538; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-
109], page 508.


NEW QUESTION # 80
You are managing a wireless access point in autonomous mode using the Web based interface. You capture traffic during this management task and notice that you can see the HTML code of the Web pages used for access point management. What error in administration could be the cause of this security concern?

Answer: D

Explanation:
The error in administration that could be the cause of this security concern is that HTTP is in use instead of HTTPS. HTTP is an unencrypted protocol that transfers data in plain text over the network. This means that anyone who captures the traffic can see the HTML code of the Web pages used for access point management, as well as any sensitive information such as passwords or configuration settings. HTTPS is an encrypted protocol that uses SSL/TLS to secure the data transmission between the Web browser and the Web server.
HTTPS prevents anyone from snooping on or tampering with the Web traffic. Therefore, HTTPS should always be used for Web based management of wireless access points, especially in autonomous mode where there is no centralized controller to enforce security policies. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 431; [HTTP vs HTTPS: What's The Difference And Why Should You Care?].


NEW QUESTION # 81
The center frequency of channel 1 in the 2.4 GHz band is 2.412 GHz (2412 MHz). What is the center frequency of channel 4?

Answer: A

Explanation:
The center frequency of channel 4 in the 2.4 GHz band is 2.427 GHz (2427 MHz). The center frequency of a channel is the midpoint of its frequency range, where the signal strength is highest and most concentrated. The center frequency of channel 1 in the 2.4 GHz band is 2.412 GHz (2412 MHz), as given in the question. The center frequency of each subsequent channel is obtained by adding 5 MHz to the previous channel's center frequency, since the channels are spaced 5 MHz apart from each other in this band. Therefore, to find the center frequency of channel 4, we need to add 15 MHz (5 MHz x 3) to the center frequency of channel 1:
2.412 GHz + 0.015 GHz = 2.427 GHz
Alternatively, we can use a formula to calculate the center frequency of any channel in the 2.4 GHz band:
Center frequency (GHz) = 2.407 + (0.005 x Channel number)
Using this formula for channel 4, we get:
Center frequency (GHz) = 2.407 + (0.005 x 4)
Center frequency (GHz) = 2.407 + 0.02
Center frequency (GHz) = 2.427 References: 1, Chapter 3, page 85; 2, Section 3.2


NEW QUESTION # 82
You are installing an AP to be used by 27 laptops. All laptops will connect on the 5 GHz frequency band. A neighbor network uses channels 1 and 6. What channel should be used for this AP and why?

Answer: B

Explanation:
A 5 GHz channel should be used for this AP because channels 1 and 6 are 2.4 GHz channels and they have no impact on the decision. The 5 GHz frequency band offers more non-overlapping channels than the 2.4 GHz frequency band, which reduces interference and improves performance. The 5 GHz frequency band also supports higher data rates and wider channel bandwidths than the 2.4 GHz frequency band, which increases capacity and throughput. The 5 GHz frequency band also has less interference from other devices and sources than the 2.4 GHz frequency band, which enhances reliability and quality of service. Therefore, it is recommended to use the 5 GHz frequency band for WLANs whenever possible. Channels 1 and 6 are two of the three non-overlapping channels in the 2.4 GHz frequency band (the other one is channel 11). They are used by a neighbor network in this scenario, but they do not affect the channel selection for this AP because they operate in a different frequency band than the 5 GHz frequency band. Channel 6 is not always best to use; it depends on the interference and congestion level in the environment. Channel 1 is not best to use because it has a lower frequency than channel 6; frequency does not determine channel quality or performance. Channel
11 is not best to use because it is also a 2.4 GHz channel and it may interfere with channels 1 and
6. References: CWNA-109 Study Guide, Chapter 4: Antenna Systems and Radio Frequency (RF) Components, page 113


NEW QUESTION # 83
What factor is likely to cause the least impact on the application layer throughput of an 802.11n client station in a 2.4 GHz HT BSS?

Answer: B

Explanation:
Implementing Fast BSS Transition (FT) for roaming is likely to cause the least impact on the application layer throughput of an 802.11n client station in a 2.4 GHz HT BSS. FT is a feature that allows a client station to quickly switch from one AP to another within the same ESS (Extended Service Set) without having to re-authenticate and re-associate with each AP. This reduces the latency and packet loss that may occur during roaming, thus improving the user experience and maintaining the application layer throughput. FT is defined in the IEEE 802.11r amendment and is also known as Fast Roaming or Fast Secure Roaming. References: , Chapter 9, page 367; , Section 6.3


NEW QUESTION # 84
......

Just install the CWNP Wireless Network Administrator (CWNA) (CWNA-109) PDF dumps file on your desktop computer, laptop, tab, or even on your smartphone and start CWNP Wireless Network Administrator (CWNA) (CWNA-109) exam preparation anytime and anywhere. Whereas the other two CWNP Wireless Network Administrator (CWNA) (CWNA-109) exam questions formats are concerned both are the easy-to-use and compatible Mock CWNA-109 Exam that will give you a real-time environment for quick CWNP Exams preparation. Now choose the right CWNP CWNA-109 exam questions format and start this career advancement journey.

CWNA-109 Latest Exam Answers: https://www.pass4cram.com/CWNA-109_free-download.html

BTW, DOWNLOAD part of Pass4cram CWNA-109 dumps from Cloud Storage: https://drive.google.com/open?id=19VTPC1umGYIfcKygMwKvJmGB5CHLqhlp

Report this wiki page